Extractor Kit for Springfield SA-35 and Browning Hi-Power

Description

This Apex Heavy Duty Extractor Kit is a direct replacement for the factory extractor in your Springfield SA-35 or Browning Hi-Power. Priced at $50, it addresses a common weak point in these classic 9mm pistols, giving you the reliability your gun should have had from the factory.

Designed from 37 years of hands-on work with semi-automatic pistols, this extractor is built specifically for the 9mm cartridge. The claw geometry is engineered around the exact case dimensions and the unique extractor location and angle inside the Hi-Power slide. This means it grabs the spent casing firmly every time, reducing the chance of a stovepipe or failure to eject when you need the gun to run.

The extractor body itself is Wire EDM cut from heat treated, high tensile strength tool steel. It gets a black oxide finish for corrosion resistance and reduced glare. This is not a MIM part — it’s a solid, machined piece of steel that will hold up under hard use. The kit also includes an extra power extractor spring and a replacement extractor pin, so you have everything needed for a complete swap.

One critical feature is the chamber-facing surface of the hook. In the event of a failure to extract caused by a bad round or weak ammunition, this surface allows the case rim to override the hook rather than locking the action solid. That keeps you in the fight instead of needing a rod to clear the chamber.

Once installed, here is what you can expect from this kit:

• Smooth feeding from the magazine — the extractor does not drag on the next round as it rises.
• Consistent, positive extraction — every spent case is pulled free with authority.
• A uniform ejection pattern — brass lands in the same spot, making it easier to track and reducing the chance of a case bouncing back into the action.

For the practical shooter who carries or hunts with an SA-35 or Hi-Power, this is a straightforward upgrade that eliminates a known failure point. It fits the standard slide and barrel configuration with no additional fitting required beyond basic disassembly. If you already trust your Springfield or Browning for concealed carry or field use, this extractor kit gives you one less thing to worry about when the gun needs to work.